The reason for the axis bending of the pressure gauge core

In general, the main reason for the axis bending of the pressure gauge core is the improper operation caused by the user when remove the pressure gauge pointer. When the pressure gauge is removed,the correct method is : The first is to use the needle to carry out the pressure gauge machine core disassembly; The second is to remove the screwdriver with two, which requires that the left and right hand should be evenly applied. But some users are not using the above method when removing the pointer, but with a screwdriver, it is easy to bend the axis of the pressure gauge machine because of the single force.

At your service.

Yuyao Shuntai Instrument Co.,Ltd.

CAPSULE GAUGE 1.Does your company liquid filled pressure gauge leak oil? Address:Doumen Yuyao Zhejiang P.R.China
LIQUID FILLED GAUGE 2.Does your company pressure gauge figure show not correctly? Tel:+86-1860-660-7587
ALL STAINLESS STEEL GAUGE 3.Will bourdon tube for the gauge break? Fax:+86-574-6264-3932
THERMOMETER-MANOMETER 4.The installation method and installation requirements of pressure gauge
  5.Which kind of pressure gauge should be stopped?
  6.Stainless steel pressure gauge and the ammonia pressure gauge  
  7.How to choose the most suitable pressure gauge(1)